Digital Doc 5 Plus - Silver You can simultaneously gauge the temperature, monitor voltage, and monitor the fans of up to eight different system devices with the new improved DigitalDoc5+. This unit safeguards your system from overheating and protects you from losing valuable data or hardware. $58.99

The Digital Doc series of bay devices has long been a favorite of the overclocker/power user. This latest upgrade improves an already excellent product with USB extension ports and modifications to the Doc's sensor functions and controls. The new version comes with (2) USB 2.0 Ports and (1) Firewire Port. The new Doc is also supplied with 6 flat type sensors (previously only 2), plus 2 bulb type sensors. Features and Details of the Digital Doc 5+ New! Blue LCD New! Front extension for your USB/Firewire ports New! On/Off switch for alarm New! Separate on and off temperature set point for your fans. Off now 5% below On set point! Support for Hi-Performance 120MM fans: The DigitalDoc5+ supports 60 MM to 120MM Hi-Performance fans. Up to 12 Watts or 1000mA! Scan all temperatures and RPM speeds continuously: The DigitalDoc5+ can be set to scan all available temperature channels and RPM speeds continuously. Good for keeping an eye on an important heat source during heavy usage. Especially suitable for DIY applications, Gamers, Overclockers and PC Enthusiasts, the DigitalDoc5+ can be used with RAID towers, servers, Industrial PCs, and personal computers. Monitoring temperature range: 0-90 degrees C (32-194 F). User can adjust the set-point value. If the temperature reaches the set-point, the fan for that channel is automatically activated; after the fan has been turned on, if the temperature continues to rise (an additional 3 degrees C), the unit will issue a warning signal. Monitors both +5 and +12 VDC power sources; the power tolerance warning can be set to any of four values: 5%, 10%, 15%, and 20%. No batteries required; connects directly to your equipment's +12 VDC power source. LCD back-lighting function convenient for diagnostic work and for adjusting the settings. Back-lighting function can be set to always be on, or to just be on when in use, reducing electricity use and environmental energy needs. Uses EEPROM memory chip to save all settings. When equipment is turned on, there is no need to re-enter settings. Unit easily installs in any 5.25" opening. All connected fans can be activated when the power is turned on, or only a portion of them. This reduces energy consumption and creates a quieter work environment. Comes with override fan control function. User can turn on fan at any time with the FORCE function, without having to wait for the temperature to rise. Facilitates objective scientific analysis or MIS investigation; quickly clarifies problem source in equipment or system. The DigitalDoc5+ temperature sensor acts as early warning system by checking temperature levels every 20 seconds. Any computer device that generates even modest heat has the capacity to overheat without warning and destroy valuable data or hardware. Temperatures are displayed on a front-panel readout so you know the exact temperature of any device in your system at all times. Should any device begin to overheat, the DigitalDoc5+ activates up to eight cooling fans, immediately bringing the system temperatures down and at the same time alerting you by lighting the "WARNING" - "TOO HI" LED displays and sounding a continuous beeper, all in time for you to take preventative action to avoid loss. Should a fan in any device fail, dangerously high temperatures can develop rapidly. The DigitalDoc's fan monitor tracks each fan's rpm signal. If the fan begins to die, this warning system gives you time to replace it before damage occurs.