Important Note - As with all of our water cooling products - no returns will be accepted,
nor any type of refund offered for Koolance products once they are sold. All support and
replacement of Koolance products is handled directly by Koolance - not Plycon.
Koolance BLUE LED Modification
One of the coolest MODs for your Koolance Case! This Blue LED block is 100% custom made for the Koolance monitor that rest on top of the EXOS, or Tower cases. No longer are you stuck with red LEDs.
This mod requires complete disassembly, de-soldering and soldering to complete. A true DIY project for the hard core modder.
$12.99
Koolance CPU 100 CPU Waterblock
The CPU-100 is the smallest processor liquid cooler available. Complete with Koolance's unique "see-through" cover, the pure copper
interface expels heat from sources up to 100W. Works with AMD 462/A, Intel 370, and Intel 423 (requires special clip) CPUs.
$39.99
Koolance CPU 200G CPU Waterblock
Plated in Gold, the CPU-200G maintains a long-lasting and polished interface. Designed
for heat sources up to 200W. Works with AMD 462/A, Intel 370, and Intel 478 CPUs.
$54.99
Koolance Motherboard Chipset Waterblock
This waterblock is ideal to replace noisy chipset fans, or to cool hot northbridge chipsets.
The waterblock has been designed so that it's nozzles are angled to provide better clearance
of any possible surface mount components near the chipset.
$24.99
Koolance GeForce 4 Spacer
The GF4 Spacer is used on some GeForce 4 cards which require large heatsinks to remain over the card, cooling both the RAM and the chipset. The adapter allows a Chipset Cooler to replace the original fan without removing the original heatsink.
$8.99
Koolance Video Chipset Waterblock
This waterblock is ideal to help reduce blazing heat levels of video chipsets down to
merely lukewarm temperature levels. Geforce 4 cards require a spacer/extender in order
for this waterblock to work. The motherboard chipset cooler can also be used to
cool video chipsets.
$24.99
Koolance Hard Drive Waterblock
The hard drive waterblock captures heat from the spindle motor and printed circuit boards of IDE and SCSI drives. A unique thermal gap filler keeps a flush contact with the device for better heat transfer. It can also cool another hard drive through the use of the Second Hard Drive Upgrade kit described below.
$34.99
Koolance 2nd Hard Drive Kit
Upgrade kit that allows the Hard Drive Waterblock (described above) to cool two hard drives.
Kit includes additional thermal compound, mounting screws, and a steel plate to attach it.
This product will not work with the EXOS system.
$21.99
Koolance Replacement Solution
About 70cc's of Koolance's cooling liquid concentrate (basically two 35cc applications).
$9.99
All prices and specifications
are subject to change without notice. All product names,
trademarks, and registered trademarks are the property of
their respective owners. Any use of copyrighted material
or trademarks on this site should not be viewed as a challenge
to those copyrights or trademarks.
By using this site, or ordering from
it, you acknowledge that you have read, understood, and
agree to be bound by Plycon's policies. Please review our
terms and policies, and if you do not agree with them -
please do not order from our site.
Plycon's website looks best when viewed
at 1024 x 768 or higher resolution...
